After the winding machine, shrink and other packaging equipment for the rear packaging, you can use the ink machine to print the date or other information on the outer packaging of the product. The ink wheel coder is suitable for printing the production date, lot number, warranty period on the surface of materials such as labels, soft packaging carton, paper, plastic bag aluminum foil bags, and can be printed in large quantities with high efficiency.

The following briefly introduces the operation process of the ink-wheel printer:

Turn the heating knob on to Preheat. When the Preheat begins, it can be adjusted to the highest indication position. The machine can work after preheating for about 3 minutes. After heating, it can be adjusted to 3 scales.

2, turn on the ink machine to control, run the switch, and put the single printed items into the machine table for testing.

3, the items that need to be printed will automatically sense once after passing the photoelectric switch. In this way, the printing wheel will turn once, that is, the printing word will be counted once, and the counter will also count once.

4, adjust the printing wheel and the printing wheel to light contact depth of about 0.08 mm. Adjust the ink wheel to the appropriate contact depth of about 0.05.

5, adjust the position of typographical buttons and fine-tuning buttons, according to the need to print the position of these two buttons, you can print in bulk.